| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water level height |
| s | Sigma - Standard deviation of 1 second samples used to compute the water level height |
| f | Data Flags - in order of listing: -- (O) Count of number of 1 second samples that fall outside a 3-sigma band about the mean -- (F) A flag that when set to 1 indicates that the flat tolerance limit was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded -- (L) A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded |
| q | Quality Assurance/Quality Control level -- p = preliminary -- v = verified |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water level height |
| s | Sigma - Standard deviation of 1 second samples used to compute the water level height |
| f | Data Flags - in order of listing: -- (I) A flag that when set to 1 indicates that the water level value has been inferred -- (F) A flag that when set to 1 indicates that the flat tolerance limit was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded -- (T) A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded |
| q | Quality Assurance/Quality Control level -- p = preliminary -- v = verified |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water level height |
| s | Sigma - Standard deviation of 1 second samples used to compute the water level height |
| f | Data Flags - in order of listing: -- (I) A flag that when set to 1 indicates that the water level value has been inferred -- (L) A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water level height |
| ty | Type - Designation of Water level height. HH = Higher High water, H = High water, L = Low water, LL = Lower Low water |
| f | Data Flags - in order of listing: -- (I) A flag that when set to 1 indicates that the water level value has been inferred -- (L) A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value – Mean hourly data over a 24 hour period |
| f | Data Flags - in order of listing: -- (I) A flag that when set to 1 indicates that the water level value has been inferred -- (L) A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded |
| Field | Description |
|---|---|
| dailyMaxHourly | Daily maximum water level from the hourly water level data |
| dailyMinHourly | Daily minimum water level from the hourly water level data |
| dailyMax6Min | Daily maximum water level from the 6-minute water level dat |
| dailyMin6Min | Daily minimum water level from the 6-minute water level data |
| date6Min | Time - Date of the six minute observation |
| time6Min | Time -Time of the six minute observation |
| value6Min | Value - Measured six minute water level height |
| pcComplet6Min | Percent Completeness - Percentage of the six minute water
level data in a day • (Number of six minute observations ÷ the expected 6 minute observation in 24 hours which is 240) × 100 |
| flag6Min | Data Flags - A flag that when set to 1 indicates that the six minute water level value has been inferred |
| dateHourly | Time - Date of the hourly observation |
| timeHourly | Time - Time of the hourly observation |
| valueHourly | Value - Measured hourly water level height |
| pcCompleteHourly | Percent Completeness - Percentage of the hourly water
level data in a day • (Number of hourly observations ÷ the expected hourly observation in 24 hours which is 24) × 100 |
| flagHourly | Data Flags - A flag that when set to 1 indicates that the hourly water level value has been inferred |
| max_min_type | Type - Designation of Water level height. max = observed daily maximum water level, min = observed daily minimum water level |
| Field | Description |
|---|---|
| year | Year |
| month | Month |
| highest | Highest Tide |
| MHHW | Mean Higher-High Water |
| MHW | Mean High Water |
| MSL | Mean Sea Level |
| MTL | Mean Tide Level |
| MLW | Mean Low Water |
| MLLW | Mean Lower-Low Water |
| DTL | Mean Diurnal Tide Level |
| GT | Great Diurnal Range |
| MN | Mean Range of Tide |
| DHQ | Mean Diurnal High Water Inequality |
| DLQ | Mean Diurnal Low Water Inequality |
| HWI | Greenwich High Water Interval (in Hours) |
| LWI | Greenwich Low Water Interval (in Hours) |
| lowest | Lowest Tide |
| inferred | A flag that when set to 1 indicates that the water level value has been inferred |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water level height |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Predicted water level height |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured air gap |
| s | Sigma - Standard deviation of 1 second samples used to compute the air gap |
| f | Data Flags - in order of listing: -- (O) Count of number of 1 second samples that fall outside a 3-sigma band about the mean -- (F) A flag that when set to 1 indicates that the flat tolerance limit was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded -- (A) A flag that when set to 1 indicates that either the maximum or minimum expected air gap limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| s | Speed - Measured wind speed |
| d | Direction - wind direction in degrees |
| dr | Direction - wind direction in text |
| g | Gust - Measured wind gust speed |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum wind speed was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured air pressure |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected air pressure was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected air pressure was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured air temperature |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected air temperature was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected air temperature was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured visibility |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected visibility was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected visibility was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured humidity |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected humidity was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected humidity was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured water temperature |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected water temperature was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected water temperature was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| v | Value - Measured conductivity |
| f | Data Flags - in order of listing: -- (X) A flag that when set to 1 indicates that the maximum expected conductivity was exceeded -- (N) A flag that when set to 1 indicates that the minimum expected conductivity was exceeded -- (R) A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| s | Salinity |
| g | Specific Gravity |
| Field | Description |
|---|---|
| t | Time - Date and time of the observation |
| s | Speed - Measured current speed |
| d | Direction - current direction in degrees |
| b | Bin number |
| echo1 | Echo Intensity Beam 1 (Counts) |
| echo2 | Echo Intensity Beam 2 (Counts) |
| echo3 | Echo Intensity Beam 3 (Counts) |
| echo4 | Echo Intensity Beam 4 (Counts) |
| corr1 | Correlation Magnitude Beam 1 (Counts) |
| corr2 | Correlation Magnitude Beam 2 (Counts) |
| corr3 | Correlation Magnitude Beam 3 (Counts) |
| corr4 | Correlation Magnitude Beam 4 (Counts) |
| Field | Description |
|---|---|
| Time | Time - Date and time of the current prediction |
| Velocity_Major | Velocity along major axis |
| meanEbbDir | ebb direction in degrees |
| meanFloodDir | flood direction in degrees |
| Bin | Bin number |
| Depth | Bin depth |
| Speed | Speed - predicted current speed |
| Direction | Direction - current direction in degrees |
| Field | Description |
|---|---|
| Time | Time - Date and time of the observation(GMT only) |
| h | The heading of the current meter refers to the direction in which instrument is oriented relative to a reference direction, usually true north or magnetic north. |
| p | Pitch in degrees |
| r | Roll in degrees |
| t | Temperature in degrees Celsius |
| pr | Pressure in decibars |
| d | Depth in meters |
| v | Battery voltage measured in volts |